Show Ip Pimsm Rphash - Dell PowerConnect 8024 Cli Reference Manual

Join Prune Interval (secs)..................... 60
Neighbor Count ................................ 0
Designated Router.............................. 1.1.1.1
DR Priority.................................... 1
BSR Border..................................... Disabled

show ip pimsm rphash

The show ip pimsm rphash command displays which rendezvous point (RP) is being selected
for a specified group.
Syntax
show ip pimsm rphash
group-address — Group IP address supported by RP.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
The following fields are displayed:
RPAddress of the RP for the group specified
OriginIndicate by which mechanism (BSR or static) the RP was selected.
Example
console#show ip pimsm rphash 225.1.0.5
RP
Address
---------------- -----
1.1.1.1
group-address
Type
Static
Multicast Commands
725