Show Ipv6 Pimsm Bsr - Dell PowerConnect 8024 Cli Reference Manual

FF1E::/64
PIM-SM INTERFACE STATUS
Interface
---------
vlan 3
vlan 6
vlan 9

show ipv6 pimsm bsr

Use the show ipv6 pimsm bsr command to display the bootstrap router (BSR) information. The
output includes elected BSR information and information about the locally configured
candidate rendezvous point (RP) advertisement.
Syntax
show ipv6 pimsm bsr
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimsm bsr
BSR Address.................................... 3001::1
BSR Priority................................... 23
BSR Hash Mask Length...........................
Next bootstrap message(hh:mm:ss)............... 00:00:11
Next Candidate RP advertisement(hh:mm:ss)...... 00:00:12
650
IPv6 Multicast Commands
Interface-Mode
--------------
Enabled
Enabled
Enabled
Operational-Status
----------------
Operational
Operational
Operational
10