RMON Commands
This chapter explains the following commands:
•
rmon alarm
•
rmon collection history
•
rmon event
•
show rmon alarm
•
show rmon alarm-table
•
show rmon collection history
•
show rmon events
•
show rmon history
•
show rmon log
•
show rmon statistics
rmon alarm
Use the rmon alarm command in Global Configuration mode to configure alarm conditions. To
remove an alarm, use the no form of this command. Also see the related show rmon alarm
command.
Syntax
index variable interval rthreshold fthreshold revent fevent
rmon alarm
direction
name
] [owner
index
no rmon alarm
index — The alarm index. (Range: 1–65535)
•
variable — A fully qualified SNMP object identifier that resolves to a particular instance of an
•
MIB object.
interval — The interval in seconds over which the data is sampled and compared with the
•
rising and falling thresholds. (Range: 1–4294967295)
rthreshold — Rising Threshold. (Range: 0–4294967295)
•
fthreshold — Falling Threshold. (Range: 0–4294967295)
•
]
type
[type
] [startup
RMON Commands
66
975