Show Ipv6 Mld Interface - Dell PowerConnect 8024 Cli Reference Manual

show ipv6 mld interface

The show ipv6 mld interface command is used to display MLD related information for an
interface.
Syntax
show ipv6 mld interface { vlan
vlan-id — A valid VLAN id.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
The following information is displayed for the specified interface:
Interface
MLD Global Admin
Mode
MLD Interface Admin
Mode
MLD Operational
Mode
MLD Version
Query Interval
Query Max Response
Time
Robustness
Startup Query Interval This value indicates the configured interval between General Queries sent by a
Startup Query Count
Last Member Query
Interval
684
IPv6 Routing Commands
vlan-id
| all }
The interface number in unit/slot/port format.
This field displays the configured global administrative status of MLD.
This field displays the configured interface administrative status of MLD.
The operational status of MLD on the interface.
This field indicates the version of MLD configured on the interface.
This field indicates the configured query interval for the interface.
This field indicates the configured maximum query response time (in seconds)
advertised in MLD queries on this interface.
This field displays the configured value for the tuning for the expected packet
loss on a subnet attached to the interface.
Querier on startup.
This value indicates the configured number of Queries sent out on startup,
separated by the Startup Query Interval.
This value indicates the configured Maximum Response Time inserted into
Group-Specific Queries sent in response to Leave Group messages.