Show Voice Vlan - Dell PowerConnect 8024 Cli Reference Manual

Syntax
voice vlan {
{ enable | disable } | dscp
no voice vlan
vlanid
•
priority
•
• trust
—
vlan port.
• untrust
voice vlan port.
• dscp
—
Default Configuration
The default DSCP value is 46.
Command Mode
Interface Configuration (Ethernet) mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-1/g1)#voice vlan 1
console(config-if-1/g1)#voice vlan dot1p 1
console(config-if-1/g1)#voice vlan none
console(config-if-1/g1)#voice vlan untagged

show voice vlan

show voice vlan [interface {<
Syntax
When the interface parameter is not specified, only the global mode of the voice VLAN is
displayed.
When the interface parameter is specified:
Voice VLAN ModeThe admin mode of the voice VLAN on the interface.
524
Voice VLAN Commands
vlanid priority
| dot1p
dscp
}
The voice VLAN ID.
—
The Dot1p priority for the voice VLAN on the port.
—
Trust the dot1p priority or DSCP values contained in packets arriving on the voice
Do not trust the dot1p priority or DSCP values contained in packets arriving on the
—
The DSCP value (Range: 0–64).
unit/port
| none | untagged | data priority { trust | untrust } | auth
> |all}]