Hostroutesaccept - Dell PowerConnect 8024 Cli Reference Manual

Syntax
enable
no enable
Default Configuration
Enabled is the default configuration.
Command Mode
Router RIP Configuration mode.
User Guidelines
This command has no user guidelines.
Example
console(config-router)#enable

hostroutesaccept

Use the hostroutesaccept command in Router RIP Configuration mode to enable the RIP
hostroutesaccept mode. Use the no form of the command to disable the RIP hostroutesaccept
mode.
Syntax
hostroutesaccept
no hostroutesaccept
Default Configuration
Enabled is the default configuration.
Command Mode
Router RIP Configuration mode.
User Guidelines
This command has no user guidelines.
Example
console(config-router)#hostroutesaccept
849
Routing Information Protocol Commands