Dell PowerConnect 8024 Cli Reference Manual page 84

Command
ipv6 mld query-max-response-time Sets MLD querier's maximum response time for the
ipv6 mld router
ipv6 mtu
ipv6 nd dad attempts
ipv6 nt managed-config-flag
ipv6 nd ns-interval
ipv6 nd other-config-flag
ipv6 nd prefix
ipv6 nd ra-interval
ipv6 nd ra-lifetime
ipv6 nd reachable-time
ipv6 nd suppress-ra
ipv6 pimdm
ipv6 pimdm query-interval
ipv6 route
ipv6 route distance
ipv6 unicast-routing
ping ipv6
ping ipv6 interface
84
Command Groups
Description
interface.
Enables MLD in the router in global configuration mode
and for a specific interface in interface configuration mode.
Sets the maximum transmission unit (MTU) size, in bytes,
of IPv6 packets on an interface.
Sets the number of duplicate address detection probes
transmitted while doing neighbor discovery.
Sets the "managed address configuration" flag in router
advertisements.
Sets the interval between router advertisements for
advertised neighbor solicitations.
Sets the "other stateful configuration" flag in router
advertisements sent from the interface.
Sets the IPv6 prefixes to include in the router
advertisement.
Sets the transmission interval between router
advertisements.
Sets the value that is placed in the Router Lifetime field of
the router advertisements sent from the interface.
Sets the router advertisement time to consider a neighbor
reachable after neighbor discovery confirmation.
Suppresses router advertisement transmission on an
interface.
Enables PIM-DM Multicast Routing Mode across the
router in global configuration mode or on a specific routing
interface in interface mode.
Configures the PIM-DM Hello Interval for the specified
router interface.
Configures an IPv6 static route
Sets the default distance (preference) for static routes.
Enables forwarding of IPv6 unicast datagrams.
Determines whether another computer is on the network.
Determines whether another computer is on the network
using Interface keyword.
Mode*
IC
GC
IC
IC
IC
IC
IC
IC
IC
IC
IC
IC
IC
GC
IC
IC
GC
GC
GC
PE
PE