Dell PowerConnect 8024 Cli Reference Manual page 60

GVRP
Command
clear gvrp statistics
garp timer
gvrp enable (global)
gvrp enable (interface)
gvrp registration-forbid
gvrp vlan-creation-forbid
show gvrp configuration
show gvrp error-statistics
show gvrp statistics
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
IGMP Snooping
Command
ip igmp snooping (Global)
ip igmp snooping (Interface)
ip igmp snooping host-time-out
ip igmp snooping leave-time-out
ip igmp snooping mrouter-time-
out
show ip igmp snooping groups
show ip igmp snooping interface
show ip igmp snooping mrouter
ip igmp snooping (VLAN)
60
Command Groups
Description
Clears all the GVRP statistics information.
Adjusts the GARP application join, leave, and leaveall
GARP timer values.
Enables GVRP globally.
Enables GVRP on an interface.
De-registers all VLANs, and prevents dynamic VLAN
registration on the port.
Enables or disables dynamic VLAN creation.
Displays GVRP configuration information,
timer values, whether GVRP and dynamic VLAN
creation is enabled, and which ports are running GVRP
Displays GVRP error statistics.
Displays GVRP statistics.
Description
In Global Config mode, Enables Internet Group
Management Protocol (IGMP) snooping.
Enables Internet Group Management Protocol (IGMP)
snooping on a specific VLAN.
Configures the host-time-out.
Configures the leave-time-out.
Configures the mrouter-time-out.
Displays Multicast groups learned by IGMP snooping.
Displays IGMP snooping configuration.
Displays information on dynamically learned Multicast
router interfaces.
In VLAN Config mode, enables IGMP snooping on a
particular VLAN or on all interfaces participating in a
VLAN.
Mode*
PE
IC
GC
IC
IC
IC
including
PE
UE
UE
Mode*
GC
IC
IC
IC
IC
UE
PE
PE
VLAN