Ipv6 Address - Dell PowerConnect 8024 Cli Reference Manual

ipv6 address

Use the ipv6 address command to set the IPv6 address of the management interface. Use the
"no" form of this command to reset the IPv6 address to the default.
Syntax
ipv6 address {
no ipv6 address
prefix — Consists of the bits of the address to be configured.
•
prefix-length — Designates how many of the high-order contiguous bits of the address make
•
up the prefix.
• eui64—The optional eui-64 field designates that IPv6 processing on the interfaces is enabled
using an EUI-64 interface ID in the low order 64 bits of the address. If this option is used, the
value of prefix_length must be 64 bits.
• autoconfig— Use this keyword to set the IPv6 address auto configuration mode.
• dhcp— Use this keyword to obtain an IPv6 address via DHCP.
Default Configuration
There is no IPv6 address configured by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 address dhcp
console(config)#ipv6 address autoconfig
console(config)#ipv6 address 2003::6/64
console(config)#ipv6 address 2001::/64 eui64
302
IP Addressing Commands
prefix/prefix-length
[eui64] | autoconfig | dhcp }