Show Captive-Portal Interface Client Status - Dell PowerConnect 8024 Cli Reference Manual

console#show captive-portal configuration 1 client status
CP ID..................................... 1
CP Name................................... cp1
Client
MAC Address
-------------- --------------- --------- --------------------------------
0002.BC00.1290 10.254.96.47
0002.BC00.1291 10.254.96.48

show captive-portal interface client status

Use the show captive-portal interface client status command to display information about
clients authenticated on all interfaces or a specific interface.
Syntax
show captive-portal interface
interface — A valid interface in unit/port format.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal interface client status
Intf Intf Description
------ ----------------------------------- ----------------- ---------------
1/g1 Unit: 1 Slot: 0 Port: 1 Gigabit
1/g2 Unit: 1 Slot: 0 Port: 2 Gigabit
1/g3 Unit: 1 Slot: 0 Port: 3 Gigabit
Client
IP Address Interface
1/g1
1/g2
interface
client status
Interface Description
Unit: 1 Slot: 0 Port: 1 Gigabit
Unit: 1 Slot: 0 Port: 2 Gigabit
Client
MAC Address
0002.BC00.1290 10.254.96.47
0002.BC00.1291 10.254.96.48
0002.BC00.1292 10.254.96.49
0002.BC00.1293 10.254.96.50
Captive Portal Commands
Client
IP Address
897