PHY Diagnostics Commands
This chapter explains the following commands:
•
show copper-ports cable-length
•
show copper-ports tdr
•
show fiber-ports optical-transceiver
•
test copper-port tdr
show copper-ports cable-length
Use the show copper-ports cable-length command in Privileged EXEC mode to display the
estimated copper cable length attached to a port.
Syntax
show copper-ports cable-length [
interface — A valid Ethernet port. The full syntax is unit / port.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The port must be active and working in a 100M or 1000M mode.
NOTE: This command is only supported on
Example
The following example displays the estimated copper cable length attached to all ports.
console#show copper-ports cable-length
Port
Length [meters]
----
---------------
interface
]
PC8024/PC8024F 10G BaseT ports.
PHY Diagnostics Commands
65
971