Default Configuration
By default, no optional TLVs are included.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to include the system description TLV in local data transmit.
console(config-if-1/g3)#lldp transmit-tlv sys-desc
show lldp
Use the show lldp command in Privileged EXEC mode to display the current LLDP
configuration summary.
Syntax
show lldp
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the current LLDP configuration summary.
console# show lldp
Global Configurations:
Transmit Interval: 30 seconds
Transmit TTL Value: 120 seconds
Reinit Delay: 2 seconds
360
LLDP Commands