Show Policy-Map - Dell PowerConnect 8024 Cli Reference Manual

Parameter
Interface
Intf Shaping Rate
Queue Mgmt Type
Queue
Minimum Bandwidth
Scheduler Type

show policy-map

Use the show policy-map command in Privileged EXEC mode to display all configuration
information for the specified policy.
Syntax
policyname
show policy-map [
policyname — Specifies the name of a valid existing DiffServ policy. (Range: 1-31)
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Description
The port of the interface. If displaying the global configuration,
this output line is replaced with a global configuration
indication.
The maximum transmission bandwidth limit for the interface
as a whole. It is independent of any per-queue maximum
bandwidth values in effect for the interface. This value is a
configured value.
The queue depth management technique used for all queues
on this interface.
An interface supports
n
specific value is platform-dependent. Internal egress queue of
the interface; queues 0–6 are available.
The minimum transmission bandwidth guarantee for the
queue, expressed as a percentage. A value of 0 means
bandwidth is not guaranteed and the queue operates using
best-effort. This value is a configured value.
Indicates whether this queue is scheduled for transmission
using a strict priority or a weighted scheme. This value is a
configured value.
]
n
queues numbered 0 to (
QoS Commands
n
-1).The
427