Table of Contents
Advertisement
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Spanning-Tree.fm
Example
The following example shuts down Ethernet port 1/0/5 when it receives a
BPDU.
Console(config)#
gigabitethernet 1/0/5
interface
Console(config-if)#
spanning-tree bpduguard enable
clear spanning-tree detected-protocols
Use the clear spanning-tree detected-protocols Privileged EXEC command
to restart the protocol migration process (force the renegotiation with
neighboring switches) on all interfaces or on the specified interface
Syntax
[interface interface-id]
clear spanning-tree detected-protocols
Parameters
interface-id—Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port or Port-channel.
Command Mode
Privileged EXEC mode
User Guidelines
This feature should be used only when working in RSTP or MSTP mode.
Example
console# clear spanning-tree detected-protocols
spanning-tree mst priority
Use the spanning-tree mst priority Global Configuration mode command to
configure the device priority for the specified spanning-tree instance. Use the
no form of this command to restore the default configuration.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 5 / 1 5 / 1 2 - F O R P R O O F O N LY
467
Spanning-Tree Commands
Advertisement
Table of Contents
