Backend Authentication State; Authentication Success; Authentication Fails; Show Dot1X Clients - Dell PowerConnect 8024 Cli Reference Manual

Field

Backend Authentication State

Authentication success

Authentication fails

Supplicant MAC Address
Filter-ID

show dot1x clients

Use the show dot1x clients command in Privileged EXEC mode to display detailed information
about the users who have successfully authenticated on the system or on a specified port.
Syntax
show dot1x clients {all |ethernet
• all — All 802.1X clients authenticated on the system
interface — A valid Ethernet interface.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about the 802.1X clients authenticated on port
1/g9.
console#show dot1x clients ethernet 1/g9
Interface...................................... 1/g9
Description
Current state of the backend authentication state machine. Possible
values are Request, Response, Success, Fail, Timeout, Idle, and
Initialize.
Counts the number of times the state machine has received a Success
message from the Authentication Server.
Counts the number of times the state machine has received a Failure
message from the Authentication Server.
The MAC-address of the supplicant
The Filter Id assigned to the client by the RADIUS server. This field is
not applicable when the Filter-Id feature is disabled on the RADIUS
server and client.
interface
}
539
802.1X Commands