lldp med
This command is used to enable/disable LLDP-MED on an interface. By enabling MED, the
transmit and receive functions of LLDP are effectively enabled.
Syntax Description
lldp med
no lldp med
Parameter Ranges
Not applicable
Command Mode
Interface (Ethernet) Configuration
Default Value
LLDP-MED is disabled on all supported interfaces.
Usage Guidelines
No specific guidelines.
Example
console(config)#interface ethernet 1/g1
console(config-if-1/g1)#lldp med
lldp med confignotification
This command is used to enable sending the topology change notification.
Syntax Description
lldp med confignotification
no lldp med confignotification
Parameter Ranges
Not applicable
Command Mode
Interface (Ethernet) Configuration
353
LLDP Commands