Dell PowerConnect 8024 Cli Reference Manual page 81

IP Helper
Command
clear ip helper statistics
ip helper-address (global
configuration)
ip helper-address (interface
configuration)
ip helper enable
show ip helper-address
show ip helper statistics
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
IP Routing
Command
encapsulation
ip address
ip mtu
ip netdirbcast
ip route
ip route default
ip route distance
ip routing
routing
show ip brief
show ip interface
show ip protocols
show ip route
show ip route preferences
Description
Resets (to 0) the statistics displayed in show ip helper
statistics.
Configures the relay of certain UDP broadcast packets
received on any interface.
Configures the relay of certain UDP broadcast packets
received on a specific interface.
Enables relay of UDP packets.
Displays the IP helper address configuration.
Displays the number of DHCP and other UDP packets
processed and relayed by the UDP relay agent.
Description
Configures the link layer encapsulation type for the packet. IC
Configures an IP address on an interface.
Sets the IP Maximum Transmission Unit (MTU) on a
routing interface.
nables the forwarding of network-directed broadcasts.
E
Configures a static route. Use the no form of the command
to delete the static route.
Configures the default route. Use the no form of the
command to delete the default route.
Sets the default distance (preference) for static routes.
Globally enables IPv4 routing on the router.
Enables IPv4 and IPv6 routing for an interface.
Displays all the summary information of the IP .
Displays all pertinent information about the IP interface.
Displays the parameters and current state of the active
routing protocols.
Displays the routing table.
Displays detailed information about the route preferences. PE
Mode*
PE
GC
IC
GC
PE
PE
Mode*
IC
IC
IC
GC
GC
GC
GC
IC
PE
PE
PE
PE
81
Command Groups