Ipv6 Unreachables; Show Dos-Control - Dell PowerConnect 8024 Cli Reference Manual

ipv6 unreachables

Use the ipv6 unreachables command to enable the generation of ICMPv6 Destination
Unreachable messages. Use the "no" form of this command to prevent the generation of
ICMPv6 Destination Unreachable messages.
Syntax
ipv6 unreachables
no ipv6 unreachables
Default Configuration
ICMPv6 Destination Unreachable messages are enabled by default.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan10)#ipv6 unreachables

show dos-control

Use the show dos-control command in Privileged EXEC mode to display Denial of Service
configuration information.
Syntax
show dos-control
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
951
Denial of Service Commands