Mark Cos; Mark Ip-Dscp - Dell PowerConnect 8024 Cli Reference Manual

mark cos

Use the mark cos command in Policy-Class-Map Configuration mode to mark all packets for the
associated traffic stream with the specified class of service value in the priority field of the
802.1p header. If the packet does not already contain this header, one is inserted.
Syntax
cos-value
mark cos
cos-value — Specifies the CoS value as an integer. (Range: 0–7)
•
Default Configuration
The default value for this command is 1.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to mark all packets with a CoS value.
console(config-policy-classmap)#mark cos 7

mark ip-dscp

Use the mark ip-dscp command in Policy-Class-Map Configuration mode to mark all packets
for the associated traffic stream with the specified IP DSCP value.
Syntax
dscpval
mark ip-dscp
dscpval — Specifies a DSCP value (10, 12, 14, 18, 20, 22, 26, 28, 30, 34, 36, 38, 0, 8, 16, 24, 32,
•
40, 48, 56, 46) or a DSCP keyword (af11, af12, af13, af21, af22, af23, af31, af32, af33, af41,
af42, af43, be, cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef).
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
397
QoS Commands