Sntp Authenticate - Dell PowerConnect 8024 Cli Reference Manual

User Guidelines
This command has no user guidelines.
Examples
The following example shows the status of the SNTP.
console#show sntp status
Client Mode:
Last Update Time:
Unicast servers:
Server
---------
192.168.0.1

sntp authenticate

Use the sntp authenticate command in Global Configuration mode to require server
authentication for received Network Time Protocol (NTP) traffic. To disable the feature, use the
no form of this command.
Syntax
sntp authenticate
no sntp authenticate
Default Configuration
No authentication.
Command Mode
Global Configuration mode
User Guidelines
The command is relevant for both Unicast and Broadcast.
Example
The following example, after defining the authentication key for SNTP , grants authentication.
Status Last response
----------- --------------------------
Up 21:21:20 Mar 30 2009
Unicast
MAR 30 21:21:20 2009
Clock Commands
915