Configuration; Enable - Dell PowerConnect 8024 Cli Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#block

configuration

Use the configuration command to enter the captive portal instance mode. The captive portal
configuration identified by CP ID 1 is the default CP configuration. The system supports a total
of ten CP configurations. Use the "no" form of this command to delete a configuration. The
default configuration cannot be deleted.
Syntax
configuration cp-id
cp-id
no configuration
cp-id — Captive Portal ID (Range: 1–10).
•
Default Configuration
There is no default configuration for this command.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP)#configuration 2
console(config-CP 2)#

enable

Use the enable command to enable a captive portal configuration. Use the "no" form of this
command to disable a configuration.
Syntax
enable
888
Captive Portal Commands