Dell powerconnect 8024F Implementation Manual
Hide thumbs
Also See for powerconnect 8024F:
- User configuration manual (1294 pages) ,
- Cli reference manual (1132 pages) ,
- User manual (778 pages)
Related Manuals for Dell powerconnect 8024F
Summary of Contents for Dell powerconnect 8024F
- Page 1 Rapid EqualLogic Configuration Series Configuration Introduction Implementation Guide Switch: PowerConnect 8024F (Dual Switch LAG setting) Array: PS6010/6510 Host: Windows SISfeedback@Dell.com April 2012...
- Page 2 TYPOGRAPHICAL ERRORS AND TECHNICAL INACCURACIES. THE CONTENT IS PROVIDED AS IS, WITHOUT EXPRESS OR IMPLIED WARRANTIES OF ANY KIND. © 2011 Dell Inc. All rights reserved. Reproduction of this material in any manner whatsoever without the express written permission of Dell Inc. is strictly forbidden. For more information, contact Dell.
-
Page 3: Intended Audience
1.2 Intended audience System or Storage administrators with experience deploying Windows servers, storage systems, and Ethernet networking. If you are unsure about completing the installation, Dell support is available and ready to assist you. 1.3 List of references •... -
Page 4: Configuration Settings
Windows Update. 2.3.2 Switch This document assumes that your PowerConnect 8024F switches are at firmware version 4.1.0.19 or later. To get the latest update, visit http://support.dell.com. Installation instructions are provided as part of the download. -
Page 5: Configuration Information
2.4 Configuration information Your iSCSI SAN configuration requires several static IP addresses. Complete this form and have it available for reference during the configuration. IP addresses needed for configuration: Host iSCSI Host #1 Host #2 Host #3 Host #4 Initiator Port 1 Port 2 Array Target... - Page 6 2.5 Connectivity Diagrams Use the appropriate diagram and following point to point table when cabling the SAN. PowerConnect 8024F and PS6010 configuration...
- Page 7 PowerConnect 8024F and PS6510 configuration...
- Page 8 PowerConnect 8024F connections with the PS6010 or PS6510: Switch 1 Switch 2 Port Port Server 1, port 1 Server 1, port 2 Server 2, port 1 Server 2, port 2 Server 3, port 1 Server 3, port 2 Server 4, port 1...