Dell PowerConnect 8024 Cli Reference Manual page 101

Denial of Service
Command
dos-control firstfrag
dos-control icmp
dos-control l4port
dos-control sipdip
dos-control tcpflag
dos-control tcpfrag
ip icmp echo-reply
ip icmp error-interval
ip icmp unreachables
ip icmp redirects
ipv6 icmp error-internal
ipv6 unreachables
show dos-control
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Line
Command
exec-timeout
history
history size
line
show line
speed
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Description
Enables Minimum TCP Header Size Denial of Service
protection.
Enables Maximum ICMP Packet Size Denial of Service
protections.
Enables L4 Port Denial of Service protection.
Enables Source IP Address = Destination IP Address (SIP=
DIP) Denial of Service protection.
Enables TCP Flag Denial of Service protections.
Enables TCP Fragment Denial of Service protection.
Enables or disables the generation of ICMP Echo Reply
messages.
Limits the rate at which IPv4 ICMP error messages are sent. GC
Enables the generation of ICMP Destination Unreachable
messages.
Enables the generation of ICMP Redirect messages.
Limits the rate at which ICMPv6 error messages are sent.
Enables the generation of ICMPv6 Destination
Unreachable messages.
Displays Denial of Service configuration information.
Description
Configures the interval that the system waits for user input. LC
Enables the command history function.
Changes the command history buffer size for a particular
line.
Identifies a specific line for configuration and enters the
line configuration command mode.
Displays line parameters.
Sets the line baud rate.
Mode*
GC
GC
GC
GC
GC
GC
GC
IC
IC
GC
IC
PE
Mode*
LC
LC
GC
UE
LC
101
Command Groups