Syntax
vlan-id
show ipv6 pimsm neighbor [ all | interface vlan
]
vlan-id — A valid VLAN ID value.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
console#show ipv6 pimsm neighbor all
Slot/Port...................................... vlan 6
Neighbor Address...............................
FE80::200:FF:FE00:33
Up Time (hh:mm:ss)............................. 00:00:12
Expiry Time (hh:mm:ss)......................... 00:01:34
DR Priority.................................... 0
show ipv6 pimsm rphash
Use the show ipv6 pimsm rphash command to display which rendezvous point (RP) is being
selected for a specified group.
Syntax
group-address
show ipv6 pimsm rphash
group-address
— Group IP address supported by RP.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
652
IPv6 Multicast Commands