Dell PowerConnect 8024 Cli Reference Manual page 73

Command
spanning-tree mst cost
spanning-tree mst port-priority
spanning-tree mst priority
spanning-tree pathcost method
spanning-tree portfast
spanning-tree portfast bpdufilter
default
spanning-tree portfast default
spanning-tree port-priority
spanning-tree priority
spanning-tree tcnguard
spanning-tree transmit hold-count Set the maximum number of BPDUs that a bridge is
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
TACACS+
Command
key
port
priority
show tacacs
tacacs-server host
tacacs-server key
tacacs-server timeout
timeout
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Description
Configures the path cost for multiple spanning tree (MST)
calculations.
Configures port priority.
Configures the switch priority for the specified spanning
tree instance.
Configures the spanning tree default pathcost method
Enables PortFast mode.
Discards BPDUs received on spanningtree ports in portfast
mode.
Enables Portfast mode on all ports.
Configures port priority.
Configures the spanning tree priority.
Prevents a port from propagating topology change
notifications.
allowed to send within a hello time window (2 seconds).
Description
Specifies the authentication and encryption key for all
TACACS communications between the device and the
TACACS server.
Specifies a server port number.
Specifies the order in which servers are used.
Displays TACACS+ server settings and statistics.
Specifies a TACACS+ server host.
Sets the authentication and encryption key for all
TACACS+ communications between the switch and the
TACACS+ daemon.
Sets the interval for which the switch waits for a server host
to reply.
Specifies the timeout value in seconds.
Mode*
IC
IC
GC
GC
IC
GC
GC
IC
GC
IC
GC
Mode*
TC
TC
TC
PE
GC
GC
GC
TC
73
Command Groups