Ip Verify Binding; Show Ip Verify Interface - Dell PowerConnect 8024 Cli Reference Manual

Cli reference guide
Hide thumbs Also See for PowerConnect 8024:
Table of Contents

Advertisement

Syntax
ip verify source port-security
Default Configuration
By default, IPSG is disabled on all interfaces.
Command Mode
Interface Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config-if-1/g1)#ip verify source port-security

ip verify binding

Use the ip verify binding command in Global Configuration mode to configure static bindings.
Syntax
ip verify binding <macaddr> vlan <ipaddr> interface
Default Configuration
By default, there will not be any static bindings configured.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console(config)#ip verify binding 00:11:22:33:44:55 vlan 1
1.2.3.4 interface 1/g2

show ip verify interface

Use the show ip verify interface command in Privileged EXEC mode to display the IPSG
interface configuration.
326
IP Source Guard Commands

Advertisement

Table of Contents
loading

Table of Contents