Show Ip Rip Interface - Dell PowerConnect 8024 Cli Reference Manual

Global route changes........................... 0
Global queries................................. 0
Default Metric................................. 12
Default Route Advertise........................ 0
Redistributing.................................
Source......................................... Connected
Metric......................................... 2
Distribute List................................ Not configured
Redistributing.................................
Source......................................... ospf
Metric......................................... 10
Match Value.................................... 'nssa-external 1'
Distribute List................................ Not configured

show ip rip interface

Use the show ip rip interface command in Privileged EXEC mode to display information
related to a particular RIP interface.
Syntax
vlan-id
show ip rip interface vlan
vlan-id — Valid VLAN ID.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays information related to the VLAN 15
RIP interface.
855
Routing Information Protocol Commands