Dell PowerConnect 8024 Cli Reference Manual page 107

Syslog
Command
clear logging
clear logging file
description
level
loggin cli-command
logging
logging buffered
logging console
logging facility
logging file
logging on
port
show logging
show logging file
show syslog-servers
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
System Management
Command
asset-tag
banner motd
banner motd acknowledge
clear power average
cut-through mode
hostname
low-power
Description
Clears messages from the internal logging buffer.
Clears messages from the logging file.
Describes the syslog server.
Specifies the importance level of syslog messages.
Enable CLI command logging
Logs messages to a syslog server
Limits syslog messages displayed from an internal buffer
based on severity.
Limits messages logged to the console based on severity.
Sets the facility of the logging messages.
Limits syslog messages sent to the logging file based on
severity.
Controls error messages logging.
Specifies the port number of syslog messages.
Displays the state of logging and the syslog messages stored
in the internal buffer.
Displays the state of logging and the syslog messages stored
in the logging file.
Displays the syslog servers settings.
Description
Specifies the switch asset-tag.
Enables and configures the message-of-the-day banners.
Requires the user to acknowledge the banner displayed on
the console.
Resets the average power consumption calculation.
Enables the cut-through mode on the switch.
Specifies or modifies the switch host name.
Enables the automatic transition of a device to a lower
power mode while the cable is not connected.
Mode*
PE
PE
L
L
GC
GC
GC
GC
GC
GC
GC
L
PE
PE
PE
Mode*
GC
GC
GC
PE
GC
GC
IC
107
Command Groups