Dell PowerConnect 8024 Cli Reference Manual page 245

port-channel-number — A valid port-channel index.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode and Privileged EXEC mode
User Guidelines
This command has no user guidelines.
The following table describes the fields shown in the display:
Field
InOctets
InUcastPkts
InMcastPkts
InBcastPkts
OutOctets
OutUcastPkts
OutMcastPkts
OutBcastPkts
Alignment Errors
FCS Errors
Single Collision Frames
Multiple Collision Frames
Deferred
Transmissions
Late Collisions
Excessive Collisions
Description
Counted received octets.
Counted received Unicast packets.
Counted received Multicast packets.
Counted received Broadcast packets.
Counted transmitted octets.
Counted transmitted Unicast packets.
Counted transmitted Multicast packets.
Counted transmitted Broadcast packets.
A count of frames received that are not an integral number of octets in
length and do not pass the FCS check.
Counted frames received that are an integral number of octets in length
but do not pass the FCS check.
Counted frames that are involved in a single collision, and are
subsequently transmitted successfully.
A count of frames that are involved in a multiple collision, and are
subsequently transmitted successfully
A count of frames for which the first transmission attempt is delayed
because the medium is busy
Counted times that a collision is detected later than one slot time into
the transmission of a packet.
Counted frames for which transmission fails due to excessive collisions.
Ethernet Configuration Commands
245