Ipv6 Pimsm (Vlan Interface Config); Ipv6 Pimsm Bsr-Border - Dell PowerConnect 8024 Cli Reference Manual

Default Configuration
IPv6 PIMSM is disabled on the router by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pimsm

ipv6 pimsm (VLAN Interface config)

Use the ipv6 pimsm command in VLAN Interface configuration mode to administratively
enable PIM-SM multicast routing mode on a particular IPv6 router interface. Use the "no" form
of this command to disable PIM SM on an interface.
Syntax
ipv6 pimsm
no ipv6 pimsm
Default Configuration
PIM-SM is disabled by default.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 pimsm

ipv6 pimsm bsr-border

Use the ipv6 pimsm bsr-border command to prevent bootstrap router (BSR) messages from
being sent or received through an interface. Use the "no" form of this command to disable the
interface from being the BSR border.
642
IPv6 Multicast Commands