Show Ipv6 Ospf Range - Dell PowerConnect 8024 Cli Reference Manual

IP Address..................................... Err
ifIndex........................................ 619
OSPF Admin Mode................................ Enable
OSPF Area ID................................... 0.0.0.0
Router Priority................................ 1
Retransmit Interval............................ 5
Hello Interval................................. 10
Dead Interval.................................. 40
LSA Ack Interval............................... 1
Iftransit Delay Interval....................... 1
Authentication Type............................ None
Metric Cost.................................... 1 (computed)
OSPF Mtu-ignore................................ Disable
OSPF cannot be initialized on this interface.

show ipv6 ospf range

Use the show ipv6 ospf range command in Privileged EXEC mode to display information about
the area ranges for the specified area identifier.
Syntax
areaid
show ipv6 ospf range
areaid — Identifies the OSPF area whose ranges are being displayed.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
824
OSPFv3 Commands