Show Bridge Address-Table; Show Bridge Address-Table Count - Dell PowerConnect 8024 Cli Reference Manual

show bridge address-table

Use the show bridge address-table command in Privileged EXEC mode to display all entries in
the bridge-forwarding database.
Syntax
show bridge address-table [vlan
vlan — Specific valid VLAN, such as VLAN 1.
•
interface — A valid Ethernet port.
•
port-channel-number — A valid port-channel number.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
console#show bridge address-table
Aging time is 300 Sec
Vlan
-------
1
1
1
1
1

show bridge address-table count

Use the show bridge address-table count command in Privileged EXEC mode to display the
number of addresses present in the Forwarding Database.
178
Address Table Commands
vlan
Mac Address
---------------
0000.0001.0000
0000.8420.5010
0000.E26D.2C2A
0000.E89A.596E
0001.02F1.0B33
interface |
] [ethernet
Port Type
----- -------------
1/g1 Dynamic
1/g1 Dynamic
1/g1 Dynamic
1/g1 Dynamic
1/g1 Dynamic
port-channel-number
port-channel ]