Match Protocol - Dell PowerConnect 8024 Cli Reference Manual

User Guidelines
The ip dscp, ip precedence, and ip tos match conditions are alternative ways to specify a match
criterion for the same Service Type field in the IP header but with a slightly different user
notation.
This specification is the
in that you have complete control of specifying which bits of the IP Service Type field are
checked.
Example
The following example displays adding a match condition based on the value of the IP TOS
field in a packet.
console(config-classmap)#match ip tos AA EF

match protocol

Use the match protocol command in Class-Map Configuration mode to add to the specified
class definition a match condition based on the value of the IP Protocol field in a packet using a
single keyword notation or a numeric value notation.
Syntax
protocol-name
match protocol {
protocol-name — Specifies one of the supported protocol name keywords. The supported
•
icmp , igmp , ip , tcp , and udp .
values are
protocol-number — Specifies the standard value assigned by IANA. (Range 0–255)
•
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays adding a match condition based on the "ip" protocol name
keyword.
console(config-classmap)#match protocol ip
free form
version of the IP DSCP/Precedence/TOS match specification
protocol-number
| }
QoS Commands
407