Access-List - Dell PowerConnect 8024 Cli Reference Manual

ACL Commands
This chapter explains the following commands:
•

access-list

• deny | permit
• ip access-group
• mac access-group
• mac access-list extended
• mac access-list extended rename
• show ip access-lists
• show mac access-list
access-list
Use the access-list command in Global Configuration mode to create an Access Control List
(ACL) that is identified by the parameter
Syntax
std-list-num
access-list
interface
[redirect | mirror
ext-list-num
access-list
srcip srcmask
| any} [eq [
{
portvalue]] [precedence
id interface
] [redirect
list-name
no access-list
list-name — Access-list name up to 31 characters in length.
•
• deny | permit — Specifies whether the IP ACL rule permits or denies an action.
• every — Allows all protocols.
• eq — Equal. Refers to the Layer 4 port number being used as match criteria. The first
reference is source match criteria, the second is destination match criteria.
number — Standard protocol number. Protocol keywords icmp,igmp,ip,tcp,udp.
•
srcip — Source IP address.
•
list-name
srcip srcmask
{deny | permit} {
interface
]
{deny | permit} {every | {[icmp | igmp | ip | tcp | udp | number]
portkey portvalue
|
precedence tos tosmask
| tos
interface
| mirror ]}}
.
| every} [log] [assign-queue
dstmask
| any} [eq [portkey |
]] {dstip
dscp
| dscp ] [log] [assign-queue
5
queue-id
]
queue-
161
ACL Commands