Redirect-Url - Dell PowerConnect 8024 Cli Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#protocol http
redirect
Use the redirect command to enable the redirect mode for a captive portal configuration. Use
the "no" form of this command to disable redirect mode.
Syntax
redirect
no redirect
Default Configuration
Redirect mode is disabled by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#redirect

redirect-url

Use the redirect-url command to configure the redirect URL for a captive portal configuration.
Syntax
url
redirect-url
url — The URL for redirection (Range: 1–512 characters).
•
Default Configuration
There is no redirect URL configured by default.
892
Captive Portal Commands