Show Captive-Portal Configuration Client Status - Dell PowerConnect 8024 Cli Reference Manual

Verification Mode......................... Local
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/g1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit
- Level
User Name................................. user123
Session Time.............................. 0d:00:00:13

show captive-portal configuration client status

Use the show captive-portal configuration client status command to display the clients
authenticated to all captive portal configurations or a to specific configuration.
Syntax
show captive-portal configuration [
cp-id — Captive Portal ID.
•
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration client status
CP ID
----- --------------- ------------------ ----------------- ---------
1 cp1
2 cp2
3 cp3
896
Captive Portal Commands
CP Name Client MAC Address Client IP Address Interface
0002.BC00.1290
0002.BC00.1291
0002.BC00.1292
0002.BC00.1293
cp-id
] client status
10.254.96.47
10.254.96.48
10.254.96.49
10.254.96.50
1/g1
1/g2
1/g3
1/g4