Dhcp L2Relay Remote-Id; Dhcp L2Relay Trust - Dell PowerConnect 8024 Cli Reference Manual

User Guidelines
There are no user guidelines for this command.
Example
console(config)#dhcp l2relay circuit-id vlan 340-350

dhcp l2relay remote-id

Use the dhcp l2relay remote-id command to enable setting the DHCP Option 82 Remote ID
for a VLAN. When enabled, the supplied string is used for the Remote ID in DHCP Option 82.
Use the "no" form of this command to disable setting the DHCP Option 82 Remote ID.
Syntax
dhcp l2relay remote-id
no dhcp l2relay remote-id
remoteId — The string to be used as the remote ID in the Option 82 (Range: 1 - 128
•
characters).
Default Configuration
Setting the DHCP Option 82 Remote ID is disabled by default.
Command Mode
Global Configuration.
User Guidelines
There are no user guidelines for this command.
Example
console(config)#dhcp l2relay remote-id dslforum vlan 10,20-30

dhcp l2relay trust

Use the dhcp l2relay trust command to configure an interface to mandate Option-82 on
receiving DHCP packets.
Syntax
dhcp l2relay trust
no dhcp l2relay trust
remoteId vlan-range
vlan
remoteId vlan-range
vlan
DHCP Layer 2 Relay Commands
209