Show Bridge Multicast Filtering - Dell PowerConnect 8024 Cli Reference Manual

Cli reference guide
Hide thumbs Also See for PowerConnect 8024:
Table of Contents

Advertisement

User Guidelines
A MAC address can be displayed in IP format only if it is in the range 01:00:5e:00:00:00 through
01:00:5e:7f:ff:ff.
Example
In this example, Multicast MAC address table information is displayed.
console#show bridge multicast address-table
Vlan
MAC Address
-------
-------------------
1
0100.5E05.0505
Forbidden ports for multicast addresses:
Vlan
MAC Address
----
-----------------------
1
0100.5E05.0505
NOTE: A multicast MAC address maps to multiple IP addresses, as shown above.

show bridge multicast filtering

Use the show bridge multicast filtering command in Privileged EXEC mode to display the
Multicast filtering configuration.
Syntax
show bridge multicast filtering
vlan_id — A valid VLAN ID value.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
Type
Ports
-------
------------------------------
Static
----------------------------------------
vlan-id
Ports
Address Table Commands
181

Advertisement

Table of Contents
loading

Table of Contents