Dell PowerConnect 8024 Cli Reference Manual page 150

Syntax
aaa authentication login {default|
no aaa authentication login {default|
default — Uses the listed authentication methods that follow this argument as the default
•
list of methods when a user logs in.
list-name — Character string used to name the list of authentication methods activated when
•
a user logs in. (Range: 1-12 characters)
method1 [ method2 ...] — Specify at least one from the following table:
•
Keyword
enable
line
local
none
radius
tacacs
Default Configuration
The default login lists are "defaultList" and "networkList." "defaultList" is used by the console
and only contains the method
the method
Command Mode
Global Configuration mode
User Guidelines
The default and optional list names created with the aaa authentication login command are
used with the login authentication command. Create a list by entering the aaa authentication
list-name method
login
string used to name this list. The
authentication algorithm tries, in the given sequence.
The additional methods of authentication are used only if the previous method returns an error,
not if there is an authentication failure. To ensure that the authentication succeeds even if all
methods return an error, specify none as the final method in the command line. For example, if
none is specified as an authentication method after radius, no authentication is used if the
RADIUS server is down.
150
AAA Commands
Source or destination
Uses the enable password for authentication.
Uses the line password for authentication.
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS+ servers for authentication.
none
local
.
command for a particular protocol, where
method
list-name method1 method2...
} [
list-name
}
. "networkList" is used by telnet and SSH and only contains
argument identifies the list of methods that the
]
list-name
is any character