Ip Multicast Ttl-Threshold - Dell PowerConnect 8024 Cli Reference Manual

Example
The following example enables IP multicast on the router.
console#configure
console(config)#ip multicast
console(config)#no ip multicast

ip multicast ttl-threshold

Use the ip multicast ttl-threshold command in Interface Configuration mode to apply a
ttlvalue ttlvalue
to a routing interface. is the TTL threshold which is applied to the multicast
Data packets forwarded through the interface.
Syntax
ttlvalue
ip multicast ttl-threshold
no ip multicast ttl-threshold
ttlvalue — Specifies TTL threshold. (Range: 0-255)
•
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
ttlvalue
The following example applies a of 5 to the VLAN 15 routing interface.
console(config)#interface vlan 15
console(config-if-vlan15)#ip multicast ttl-threshold 5
708
Multicast Commands