Dell PowerConnect 8024 Cli Reference Manual page 79

DVMRP
Command
ip dvmrp
ip dvmrp metric
ip dvmrp trapflags
show ip dvmrp
show ip dvmrp interface
show ip dvmrp neighbor
show ip dvmrp nexthop
show ip dvmrp prune
show ip dvmrp route
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
IGMP
Command
ip igmp
ip igmp last-member-query-count
ip igmp last-member-query-interval Configures the Maximum Response Time inserted in
ip igmp query-interval
ip igmp query-max-response-time
ip igmp robustness
Description
Sets the administrative mode of DVMRP in the router to
active.
Configures the metric for an interface.
Enables the DVMRP trap mode.
Displays the system-wide information for DVMRP.
Displays the interface information for DVMRP on the
specified interface.
Displays the neighbor information for DVMRP.
isplays the next hop information on outgoing
D
interfaces for routing multicast datagrams.
Displays the table that lists the router's upstream prune
information.
Displays the multicast routing information for DVMRP.
Description
Sets the administrative mode of IGMP in the system to
active.
Sets the number of Group-Specific Queries sent before
the router assumes that there are no local members on the
interface.
Group-Specific Queries which are sent in response to
Leave Group messages.
Configures the query interval for the specified interface.
The query interval determines how fast IGMP Host-Query
packets are transmitted on this interface.
Configures the maximum response time interval for the
specified interface.
Configures the robustness that allows tuning of the
interface.
Mode*
GC
IC
IC
GC
PE
PE
PE
PE
PE
PE
Mode*
GC
IC
IC
IC
IC
IC
79
Command Groups