show storm-control
Use the show storm-control command in Privileged EXEC mode to display the configuration of
storm control.
Syntax
show storm-control [all |
interface — Valid Ethernet port.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following example shows storm control configurations for all valid Ethernet ports. The
second example shows flow control mode status.
console#show storm-control all
Bcast
Bcast
Intf
Mode
Level
------ ------- ------- ------- ------- ------- -------
1/g1
Disable 5
1/g2
Disable 5
1/g3
Disable 5
1/g4
Disable 5
console#show storm-control
802.3x Flow Control Mode....................... Disable
interface
]
Mcast
Mcast
Mode
Level
Disable 5
Disable 5
Disable 5
Disable 5
Ucast
Ucast
Mode
Level
Disable 5
Disable 5
Disable 5
Disable 5
Ethernet Configuration Commands
261