Dell PowerConnect 8024 Cli Reference Manual page 57

DHCP Snooping
Command
clear ip dhcp snooping binding
clear ip dhcp snooping statistics
ip dhcp snooping
ip dhcp snooping binding
ip dhcp snooping database
ip dhcp snooping database write-
delay
ip dhcp snooping limit
ip dhcp snooping log-invalid
ip dhcp snooping trust
ip dhcp snooping verify mac-
address
show ip dhcp snooping
show ip dhcp snooping binding
show ip dhcp snooping database
show ip dhcp snooping interfaces
show ip dhcp snooping statistics
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 51.
Description
Clears all DHCP Snooping entries.
clears all DHCP Snooping statistics.
Enables DHCP snooping globally or on a specific VLAN.
Configures a static DHCP Snooping binding.
Configures the persistent location of the DHCP snooping
database.
Configures the interval in seconds at which the DHCP
Snooping database will be stored in persistent storage.
Controls the maximum rate of DHCP messages.
Enables logging of DHCP messages filtered by the DHCP
Snooping application.
Configure a port as trusted for DHCP snooping.
Enables the verification of the source MAC address with
the client MAC address in the received DHCP message.
Displays the DHCP snooping global and per port
configuration.
Displays the DHCP snooping binding entries.
Displays the DHCP snooping configuration related to the
database persistence.
Displays the DHCP Snooping status of the interfaces.
Displays the DHCP snooping filtration statistics.
Mode*
PE
PE
GC/IC
GC
GC
GC
IC
IC
IC
GC
PE
PE
PE
PE
PE
57
Command Groups