Port; Priority - Dell PowerConnect 8024 Cli Reference Manual

console(config-tacacs)#key 12

port

Use the port command in TACACS Configuration mode to specify a server port number.
Syntax
port [ port-number ]
port-number — The server port number. If left unspecified, the default port number is 49.
•
(Range: 0–65535)
Default Configuration
The default port number is 49.
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to specify server port number 1200.
console(tacacs)#port 1200

priority

Use the priority command in TACACS Configuration mode to specify the order in which
servers are used, where 0 (zero) is the highest priority.
Syntax
priority [ priority ]
priority — Specifies the priority for servers. 0 (zero) is the highest priority. (Range: 0–65535)
•
Default Configuration
If left unspecified, this parameter defaults to 0 (zero).
Command Mode
TACACS Configuration mode
486
TACACS+ Commands