Show Ipv6 Mld Traffic - Dell PowerConnect 8024 Cli Reference Manual

Example
console#show ipv6 mld-proxy interface
Interface................................ vlan 10
Ver Query Rcvd Report Rcvd Report Sent Leave Rcvd Leave Sent
------------------------------------------------------------------
1 2
2 3

show ipv6 mld traffic

The show ipv6 mld traffic command is used to display MLD statistical information for the
router.
Syntax
show ipv6 mld traffic
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode
User Guidelines
The following fields are displayed:
Valid MLD Packets Received
Valid MLD Packets Sent
Queries Received
Queries Sent
Reports Received
Reports Sent
Leaves Received
Leaves Sent
0 0
0 4
The number of valid MLD packets received by the router.
The number of valid MLD packets sent by the router.
The number of valid MLD queries received by the router.
The number of valid MLD queries sent by the router.
The number of valid MLD reports received by the router.
The number of valid MLD reports sent by the router.
The number of valid MLD leaves received by the router.
The number of valid MLD leaves sent by the router.
0 2
----- -----
IPv6 Routing Commands
691