Bootpdhcprelay Cidridoptmode - Dell PowerConnect 8024 Cli Reference Manual

DHCP and BOOTP Relay Commands
This chapter explains the following commands:
•

bootpdhcprelay cidridoptmode

• bootpdhcprelay maxhopcount
• bootpdhcprelay minwaittime
bootpdhcprelay cidridoptmode
Use the bootpdhcprelay cidridoptmode command in Global Configuration mode to enable the
circuit ID option and remote agent ID mode for BootP/DHCP Relay on the system. Use the no
form of the command to disable the circuit ID option and remote agent ID mode for
BootP/DHCP Relay.
Syntax
bootpdhcprelay cidridoptmode
Default Configuration
Disabled is the default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example enables the circuit ID and remote agent ID options.
console(config)#bootpdhcprelay cidridoptmode
Circuit Id and Remote Agent Id Mode set Successfully.
DHCP and BOOTP Relay Commands
36
561