Area Virtual-Link Retransmit-Interval - Dell PowerConnect 8024 Cli Reference Manual

Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures a hello interval of 20 seconds for the OSPF virtual interface
on the virtual interface identified by area 1 and its neighbor.
console(config)#ipv6 router ospf
console(config-rtr)#area 1 virtual-link 2 hello-interval 20

area virtual-link retransmit-interval

Use the area virtual-link retransmit-interval command in Router OSPFv3 Configuration mode
to configure the retransmit interval for the OSPF virtual interface on the virtual interface
identified by
Syntax
areaid
area
areaid
no area
areaid — Valid OSPFv3 area identifier.
•
neighbor — Router ID of neighbor.
•
seconds — Retransmit interval. (Range: 0-3600)
•
Default Configuration
5 is the default value for
Command Mode
Router OSPFv3 Configuration mode.
User Guidelines
This command has no user guidelines.
Example
The following example configures the retransmit interval of 20 seconds for the OSPF virtual
interface on the virtual interface identified by area 1 and its neighbor.
794
OSPFv3 Commands
areaid neighbor
and .
neighbor
virtual-link retransmit-interval
neighbor
virtual-link
seconds
.
seconds
retransmit-interval