Arp Commands - Dell PowerConnect 8024 Cli Reference Manual

ARP Commands

This chapter explains the following commands:
• arp
• arp cachesize
• arp dynamicrenew
• arp purge
• arp resptime
• arp retries
• arp timeout
• clear arp-cache
• clear arp-cache management
• ip proxy-arp
• show arp
arp
Use the arp command in Global Configuration mode to create an Address Resolution Protocol
(ARP) entry. Use the no form of the command to remove the entry.
Syntax
ip-address mac-address
arp
ip-address
no arp
ip-address — IP address of a device on a subnet attached to an existing routing interface.
•
mac-address — A unicast MAC address for that device.
•
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
35
551
ARP Commands