Session-Timeout; Verification - Dell PowerConnect 8024 Cli Reference Manual

Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#redirect-url www.dell.com

session-timeout

Use the session-timeout command to configure the session timeout for a captive portal
configuration. Use the "no" form of this command to reset the session timeout to the default.
Syntax
timeout
session-timeout
no session-timeout
timeout — Session timeout. 0 indicates timeout not enforced (Range: 0–86400 seconds).
•
Default Configuration
There is no session timeout by default.
Command Mode
Captive Portal Instance mode.
User Guidelines
There are no user guidelines for this command.
Example
console(config-CP 2)#session-timeout 86400
console(config-CP 2)#no session-timeout

verification

Use the verification command to configure the verification mode for a captive portal
configuration.
893
Captive Portal Commands