Dell PowerConnect 8024 Cli Reference Manual page 108

Command
member
movemanagement
no cut-through mode
ping
reload
set description
show boot-version
show cut-through mode
show memory cpu
show process cpu
show sessions
show stack-port
show stack-port counters
show stack-port diag
show stack-standby
show supported switchtype
show switch
show switch chassis mgmt
show system
show system id
show system power
show tech-support
show system temperature
show users
show version
stack
standby
108
Command Groups
Description
Configures the switch.
Moves the Management Switch functionality from one
switch to another.
Disables the cut-through mode on the switch.
Sends ICMP echo request packets to another node on the
network.
Reloads the operating system.
Associates a text description with a switch in the stack.
Displays the boot image version details.
Show the cut-through mode on the switch.
Checks the total and available RAM space on the switch.
Checks the CPU utilization for each process currently
running on the switch.
Displays a list of the open telnet sessions to remote hosts.
Displays summary stack-port information for all interfaces. PE
Displays summary data counter information for all
interfaces.
Displays front panel stacking diagnostics for each port.
Shows the Standby configured in the stack.
Displays information about all supported switch types.
Displays information about the switch status.
Shows the chassis slot of the IOMs in a stack
Displays system information.
Displays the service ID information.
Displays the power supply status.
Displays system and configuration information (for
debugging/calls to technical support).
Displays the system temperature and fan status.
Displays information about the active users.
Displays the system version information.
Sets the mode to Stack Global Config.
Configures the standby in the stack.
Mode*
SG
SG
GC
UE
PE
SG
UE
PE
PE
PE
PE
PE
PE
UE
UE
UE
PE
UE
UE
UE
PE
UE
PE
UE
GC
SG